INDUSTRIAL BOILER & MECHANICAL
Industrial Boiler Tuning

Boiler combustion services

 

Tuning industrial boilers for optimal efficiency.

Boiler tuning is an important maintenance item used to adjust the air to fuel ratio in the boiler and achieve maximum combustion efficiency - the measure of how effectively the heat content of a fuel is transferred into usable heat.

 

Beyond ensuring long term equipment life and operational reliability, highly efficient boiler systems can mean significant bottom-line cost reduction, NOx reduction and fuel savings. Boiler tuning should be performed each year to maintain peak efficiency.

 

A regular boiler tune-up provides an opportunity to verify current boiler operating performance and establish a baseline for optimization adjustments, such as fine-tuning the amount of excess air available to completely burn the fuel. Using the optimal amount of excess air minimizes heat loss up the stack and improves combustion efficiency. It is not uncommon for boilers to operate at greater than desired excess air levels, resulting in in heat lost due to the increased flue gas flow, which lowers the overall boiler fuel-to-steam efficiency.

 

Two primary indicators used to measure combustion efficiency are flue gas oxygen (or carbon dioxide) composition and stack temperatures.

 

  • Flue gas composition indicates whether the fuel is being burned as efficiently as possible.
  • Flue gas temperature indicates how effectively combustion heat is being transferred to the boiler water.

 

Rule of thumb:
boiler efficiency can be increased 1% for each 15% reduction in excess air or 40°F reduction in stack gas temperature

 

Tuned to perfection.

Our combustion experts at Industrial Boiler & Mechanical are factory trained technicians, qualified to inspect and tune industrial boilers and burner equipment, according to manufacturer specifications, federal and state guidelines, and requirements of the Boiler Area Source Rule as defined by the EPA. We service all major brands of industrial boilers and burners, including equipment from Johnston Boiler, Victory Energy, cleaver Brooks, Babcock & Wilcox, Hurst Boiler and more.

 

  • Boiler Tuning
  • Boiler Inspection
  • Boiler Efficiency Optimization
  • Boiler Safety Shut-Off Verifications
  • Low Water Control Test
  • Positive Gas Valve Shut Off Testing

Tuning your boiler and burner equipment can help you identify and address elevated NOx and CO levels, steam and stack temperature variance, boiler control issues, and even tube failure. Don't wait for your industrial boiler and burner to cause emergency shutdown.

INDUSTRIAL BOILER TUNING
Contact IB&M today at (855) 753-BOILER and learn more about our boiler tuning services. We provide annual maintenance contracts to keep your entire system running smoothly.


 
24 / 7 Emergency Service
Count on IB&M's expert service technicians to solve your equipment repair challenges quickly and correctly – today.
SAFETY IS PRIORITY:   .71 EMR
With over 13,000 projects completed to date, we are proud of our safety record and boast one of the lowest EMRs in the industry:  .71.

CONTACT US

Contact IB&M Today

We are the leaders in innovative steam plant solutions. Contact the IB&M boiler experts.

One Call Does It All

IB&M is proud to provide end-to-end boiler service and repair as a fully licensed contractor in 25 states.

  • GENERAL CONTRACTOR
  • MECHANICAL CONTRACTOR
  • ELECTRICAL CONTRACTOR
  • ASME CODE REPAIRS
EXPERIENCE YOU CAN TRUST